Installing several devices

Installing several devices

One transmitter can serve a large number of Celpax devices. How many transmitters do you need?

  • The Celpax and the transmitter can connect to each other from a long distance: up to 1200 feet / 400 meters.
  • Inside it could be the same, or as little as a few meters if you have metal doors, concrete walls in-between, etc. 

Let's have a look at some examples:

 

3 Celpax devices 

  • The Celpax devices are hanging at the 3 exit doors where all employees exit at the end of the shift. 
  • All Celpax can connect to 1 transmitter (signal 1 in black).
  • The Celpax can connect to a transmitter hanging on a floor lower down, or on a higher floor.

When pressing the test button on each Celpax, it flashes green 3 times.

You're ready to start!

 

 

6 Celpax devices 

OK, let's say you have 6 exit points with Celpax devices.

  • Find a location for the 2 transmitters where all Celpax devices can connect. If you know that you have bad cell/mobile coverage, it might be a good idea to get 3 transmitters.

 

Bigger buildings/installations

Lets say your office is the reeally flash building below, and you have 1 Celpax at every floor. 

  • You would hang the transmitters (marked as yellow X) on different levels, and in different directions. 
  • The Celpax can connect to a transmitter hanging on a floor lower down, or on a higher floor.